Kramer VP-774A, User Manual

Page: 90 / 122

84 VP-774AMP - Using the Embedded Web Pages
In the Talkover mode you can set the:

Depth to determine the decrease of the audio level during microphone
takeover

Trigger to determine the microphone 1 threshold level that triggers the audio
level decrease

Attack time to set the transition time of the audio level reduction after the
signal rises above the threshold level

Hold time to define the time period talkover remains active although the
signal falls below the threshold level (for a short period of time)

Release time to define the transition time for the audio level to return from
its reduced level to its normal level after the Hold Time period
9.7 The RS-232 over TP Page
The RS-232 over TP page lets you configure the tunneling port and send various
messages through this port (see Section
10
).
Figure 80: The RS-232 over TP Page
Set the port tunneling protocol type and Ethernet port as well as the parity, Data
bits, baud rate and stop bits.