VP-734 - Presentation Switcher / Scaler Buttons
19
6.4
The Infrared Remote Control Transmitter
You can control the
VP-734
remotely from the infrared remote control transmitter
which is powered by two AAA size 1.5V DC batteries. The IR remote control
transmitter has a range of up to 15 meters and delivers instantaneous results
Figure 11: IR Remote Control
Transmitter
Key
Function
Freeze
Pauses the output video and can be
programmed to mute the audio signal at the
same time (see
Section
6.2
)
Blank
Toggles between a blank screen (blue or
black) and the display
POWER
Toggles the
VP-734
ON or OFF (standby)
Auto Image
Press to assess the image and improve the
quality accordingly, by automatically adjusting
the phase, frequency and position
Save
Press to save a profile
Recall
Press to recall a profile
Source
7 keys for selecting one of the following
sources: UNIV 1, UNIV 2, HDMI 1, HDMI 2,
HDMI 3, HDMI 4 and DP
Reset
Press and hold to reset to the default
resolution (toggles between RESET TO XGA
and 720p)
Info
Press to toggle the Info OSD menu
Vol +/-
Press to increase/decrease the output volume
Mute
Toggles to mute/unmute the output audio
signal
MENU
Shows the main OSD Menu
Navigation
arrows
Allows maneuvering within an OSD screen
(left, right, up and down, as well as the
ENTER arrow at the center)
Summary of Contents for VP-734
