40
VP-733 - Configuring the VP-733 via the OSD MENU Screens
Setting
Function
Default
For UNIV 1, UNIV 2, UNIV 3, UNIV 4
Default
Set the default EDIDs on the inputs
Default
Copy VGA Out
Copy the EDID from the sink on the PC output to the input
User Define
Setup a user defined EDID
Select a previously stored EDID (see Read VGA EDID in
Section 7.6.5
above)
Select Modeline
Select the native resolution: Default (1920x1080@60),
1024x768@60, 1280x800@60, 1280x1024@60,
1366x768@60, 1440x900@60, 1400x1050@60,
1600x900@60 (R), 1600x1200@60, 1680x1050@60,
1920x1080@60, 1920x1200@60Hz (R)
Default
7.6.7
The Maximum Volume Limit Screen
Set the maximum Program Output volume and the maximum Preview Output
volume from -100 to 24 (default = 24). Doing this allows you to limit the maximum
volume level that the user can set.
7.7
The Info Screen
From the Information screen (see
), you can verify the Program Source,
Preview Source, PIP Source, Program Output, Preview Output, HDMI Output, Sync
Mode, MCU Version, OSD Version, FPGA Version, Slave Version CPLD IO
Version, CPLD KPD Version, Dynamic IP/Static IP.
Figure 22: Information Screen
