22
VP-733 - Presentation Switcher / Scaler Buttons
6. To exit the OSD menu, press the MENU button.
Figure 11: PIP Source over Background
To replace a PIP source, press the required PIP Source on the remote control
transmitter and the PIP display will change accordingly.
6.4
Locking and Unlocking the Front Panel
To prevent changing the settings accidentally or tampering with the unit via the front
panel buttons or the remote control transmitter, lock your
VP-733
. Unlocking
releases the protection mechanism. When the front panel is locked, control is still
available via RS-232 and/or the Ethernet.
To lock the
VP-733
:
•
Press and hold the PANEL LOCK button on the front panel.
The front panel is locked and the PANEL LOCK button is illuminated.
Pressing any button other than the PANEL LOCK button has no effect
To unlock the
VP-733
:
•
Press and hold the illuminated PANEL LOCK button on the front panel
The front panel unlocks and the PANEL LOCK button is no longer illuminated
The Save Lock and Input Lock OSD functions are defined in the table in
Section
