10
VP-729 - Connecting the VP-729
The UXGA OUT 15-pin HD computer graphics video connector to a video
acceptor (for example, an analog display)
In the HDTV mode, the signal goes out via three PINS: PIN 1 is Red or Pr, PIN 2
is Green or Y, PIN 3 is Blue or Pb
4. Connect the AUDIO OUT L and R unbalanced stereo audio output and/or the
S/PDIF digital audio output to audio acceptors, for example, power amplifiers.
5. Connect the power cord.
We recommend that you use only the power cord that is supplied with this machine
6. If required, connect:
A PC via RS-232, (see
Page 11
)
The ETHERNET port, see
Section 5.2
The USB connector, audio sources and acceptors, and power cord are
not shown in
Figure 3
.
Figure 3: Connecting to the VP-729 Rear Panel
i
