Connecting the VP-715 / VP-716
5
5 Connecting the VP-715 / VP-716
This section describes how to connect
1
the
VP-715
Video To SXGA / HD
Scaler
, and the
VP-716
Video To SXGA / DVI / HD Scaler
.
To connect the
Scaler unit, connect the following to the rear panel, as the
examples in Figure 3 (
VP-715
) and Figure 4 (
VP-716
) illustrate:
1. Connect the composite video source (for example, a composite video
player) to the RCA connector CV IN.
2. Connect the s-Video source (for example, an s-Video player) to the 4p
connector Y/C IN.
3. Connect the component video
2
source (for example, an HDTV Satellite
Receiver) to the 3 RCA INPUT connectors, Y, Pb, and Pr.
4. Connect the VGA/SXGA OUT
HD15F connector to the VGA/SXGA
analog acceptor (for example, an analog display).
5. Connect the DVI OUT
connector to the DVI-D acceptor (for example, a
digital display):
VP-716
only.
6. Connect the 3 RCA OUTPUT connectors, Y, Pb, and Pr, to the
component video acceptor (for example, a plasma display).
7. Connect the 12V DC power adapter (wall transformer) to the 12V DC
socket (not illustrated in Figure 3 / Figure 4) and connect the transformer
to the mains electricity.
1 Switch OFF the power on each device before connecting it to your VP-715/VP-716. After connecting your VP-715/VP-716,
switch on its power and then switch on the power on each device
2 Sometimes called YUV, or Y, B-Y, R-Y, or Y, Pb, Pr, or Y, Cb, Cr