Operating the VP-505 3G HD-SDI to Video Scan Converter
7
The Display submenu is displayed.
4. Press the + or
–
button to highlight G OFFSET.
G OFFSET changes to green.
5. Press ENTER.
The G OFFSET parameter changes to red.
6. Press the + button to increase the value to 42.
7. Press ENTER to set the value.
G OFFSET is highlighted in green.
8. To exit to normal operation, press MENU or wait for the OSD to timeout.
6.2.1 The Main Menu
Table 3
defines the Main menu parameters and functions.
Table 3: The Main Menu Parameters and Functions
Parameter
Function
DISPLAY
Sets the output resolution, size and aspect ratio (see
Table 4
)
CONTRAST
Sets the output contrast Value range: 0-255
Default: 105
BRIGHTNESS
Sets the output
brightness
Value Range: 0-192
Default: 96
COLOR
Sets the output color parameters (see
Table 5
)
SDI AUDIO
Selects which embedded audio to output: Group 1, Group 2, Group 3, Group 4,
Auto
1
, Off
2
Default: Auto
FACTORY RESET Resets all parameters to factory defaults
INFORMATION
Displays current input resolution, output resolution and firmware revision
AUTO SYNC OFF When on, this de-activates the output after a few minutes if no input is present
3
EXIT
Exits the Main menu
6.2.2 The Display Submenu
The Display submenu sets the display output resolution, size and aspect ratio.
Table 4
defines the display output parameters.
Table 4: The Display Submenu Parameters
Parameter
Parameters
Factory Default
OUTPUT
PAL, NTSC
(PAL: 768x567i, NTSC: 720x480i)
NTSC
SIZE
Sets the output size/aspect ratio: Full, Pan scan, Letter box, Under 2,
Under 1, Over scan
Full
EXIT
Exits the Display menu
1 When set to Auto, the unit searches for the lowest group number which has audio and selects this audio group
2 Audio is not outputted
3 Useful, for example, when the output is connected to a projector, and the projector will automatically shut down when it has no input
