![background image](http://html1.mh-extra.com/html/kramer/vp-4x1-cs/vp-4x1-cs_user-manual_2002227017.webp)
14
VP-4x1CS - Operating the VP-4x1CS 4x1 PC Graphics Clean Switcher
7
Operating the VP-4x1CS 4x1 PC Graphics
Clean Switcher
The
VP-4x1CS
can be operated:
Locally using the front panel buttons (see
Section
7.1
)
Remotely using:
The embedded Web pages (see
Section
7.2
)
The
K-Single Application
(see
Section
7.3
)
7.1
Operating the VP-4x1CS Locally
This section describes:
Setting a priority Input (see
Section
7.1.1
)
Switching Between Protocol 2000 and Protocol 3000 (see
Section
7.1.2
)
Locking and unlocking the front panel buttons (see
Section
7.1.3
)
Resetting the device to factory default settings (see
Section
7.1.4
)
Upgrading the
VP-4x1CS
firmware (see
Section
7.1.5
)
EDID Handling (see
Section
7.1.6
)
7.1.1
Setting a Priority Input
When a priority input is set, the
VP-4x1CS
cycles through the inputs from 1 to 4
(beginning with the priority input) looking for a live signal. If there is no signal on
the priority input the device cycles through the inputs (from low to high) and
selects the first input that is encountered with a live signal.
Note
: When a priority Input is selected, the device does not perform clean
switching.
Note
: For clean switching, all extracted sources must be of the same resolution.