Kramer Electronics Ltd.
VP-439
– Connecting the VP-439
6
Connecting the VP-439
Always switch off the power to each device before connecting it to your
VP-439
. After
connecting your
VP-439
, connect its power and then switch on the power to each device.
To connect the
VP-439
as illustrated in the example in
1. Connect an HDMI source (for example, from a Blu-ray player) to the
HDMI IN
HDMI
connector.
2. Connect a PC graphics and unbalanced stereo audio source (for example, from a laptop
PC) to the
PC IN
15-pin HD and 3.5mm mini jack connectors.
3. Connect a composite video and unbalanced stereo audio source (for example, from a
DVD payer) to the
CV IN
RCA and
LEFT/RIGHT
RCA connectors.
4. Connect the HDMI
OUTPUT
on a DVI-I connector and the
LEFT/RIGHT
unbalanced
stereo audio on two RCA connectors to an HDMI acceptor (for example, to a display with
speakers).
5. If desired, connect the
ETHERNET
RJ-45 connector to a control device (for example, a
PC).
Figure 3: Connecting the
VP-439
Video
Scaler
