VP-429H2 Quick Start
P/N:
2 9 0 0 - 3 0 1 1 6 9 QS
Rev:
3
Scan for full manual
VP-429H2 Quick Start Guide
This guide helps you install and use your
VP-429H2
for the first time.
www.kramerav.com/downloads/VP-429H2
to download the latest user manual and check if
firmware upgrades are available.
Step 1: Check w
hat’s in the box
VP-429H2
Automatic Video Switcher/Scaler
1 Bracket set
1 Quick start guide
1 Power adapter and cord
4 Rubber feet
Step 2: Get to know your VP-429H2
#
Feature
Function
1
HDMI IN 1 SELECT Button
Press to select the HDMI IN 1 input. When HDMI IN 1 is selected, the button lights
and indicates the selected audio:
Red
– External audio from the analog Audio IN is selected.
Green
– Embedded audio from HDMI IN 1 is selected.
2
HDMI IN 1 Connector
Connect to an HDMI source.
3
HDMI IN 2 SELECT Button
Press to select the HDMI IN 2 input. When HDMI IN 2 is selected, the button lights
and indicates the selected audio:
Red
– External audio from the analog Audio IN is selected.
Green
– Embedded audio from HDMI IN 2 is selected.
4
HDMI IN 2 Connector
Connect to an HDMI source.
Press and hold HDMI IN 1 and HDMI IN 2 SELECT buttons simultaneously for a few seconds to reset the
output resolution to 1080p.
5
DP IN SELECT Button
Press to select the DP input. When DP is selected, the button lights and indicates
the selected audio:
Red
– External audio from the analog Audio IN is selected.
Green
– Embedded audio from DP IN is selected.
6
DP IN DisplayPort Connector
Connect to a DisplayPort source.
7
PC IN SELECT Button
Press to select the PC IN input. When PC IN is selected, the button lights red.
Press and hold PC IN SELECT button for a few seconds to auto-adjust the VGA
signal.
8
PC IN 15-pin HD Connector
Connect to the VGA source.
9
AUDIO IN 3.5mm Mini Jack
Connects to an unbalanced stereo audio source.
10
STEP-IN Button
Press to take control of the input that this device is connected to on a compatible
switcher.
11
ON LED
Lights green when the device is powered on.
