Kramer Electronics Ltd.
VP-427X2
– Defining VP-427X2 4K HDBT/HDMI Receiver/Scaler
4
Defining VP-427X2 4K
HDBT/HDMI Receiver/Scaler
This section defines
VP-427X2
.
Figure 1: VP-427X2 4K HDBT/HDMI Receiver/Scaler Front Panel
#
Feature
Function
ON LED
Lights green when device is powered.
INPUT Select
Button
Press to select the input (HDBT 1, HDBT 2 or HDMI).
Input
LEDs
HDBT 1
Lights green when the HDBT 1 input is selected.
HDBT 2
Lights green when the HDBT 2 input is selected.
HDMI
Lights green when the HDMI input is selected.
If the selected source is not connected to an input, its LED flashes.
3.5mm Mini Jack
Connect to an IR sensor.
Use to control a remote device that is connected to the transmitter side. IR
commands are passed via HDBT tunneling to the selected HDBT input
(1 or 2).
IR OUT 3.5mm
Mini Jack
Connect to an external IR emitter to control a local device from the transmitter
side.
MENU Button
Press to enter/exit the on-screen display (OSD) menu. Press together with the
– button to reset the output to 1080p resolution.
ENTER Button
In OSD, press to choose the highlighted menu item. Press together with the
button to reset the output to XGA resolution (1024x768).
– Button
In OSD, press to move back through menus or decrement parameter values.
Press together with the MENU button to reset the output to 1080p resolution.
Button
In OSD, press to move forward through menus or increment parameter
values. When not in OSD, press to freeze the display.
ETHERNET RJ-45
Connector
Connect to a PC via a LAN to setup and monitor the
VP-427X2
, tunnel data
via HDBT, as well as upgrade the firmware. (Configured via web pages).
PROG USB
Connector
Connect to a USB stick to perform firmware upgrades.
1
2
3
4
5
6
7
8
9
10
11
