VP-427H2 Quick Start (P/N: 2900-300831QS REV 4)
P/N:
2900- 300831QS
Rev:
4
Scan for full manual
VP-427H2 Quick Start Guide
This guide helps you install and use your
VP-427H2
for the first time.
Go to
www.kramerav.com/downloads/VP-427H2
to download the latest user manual and check if firmware
upgrades are available.
Step 1: Check what’s in the box
VP-427H2
4K HDBT to HDMI Receiver/Scaler
1 Bracket set
1 Quick start guide
1 Power adapter and cord
4 Rubber feet
Step 2: Get to know your VP-427H2
#
Feature
Function
1
PROG USB Connector
Connects to a USB memory stick for programming upgrade
2
ON
LED
Lights green when the unit is powered on
3
MENU Button
Press to enter/exit the on-screen display (OSD) menu. Press together with the –
button to reset to 1080p
4
ENTER Button
In OSD, press to choose the highlighted menu item. Press together with the
+/FREEZE button to reset to XGA
5
–
In OSD, press to move back through the list or to decrement the parameter value
6
+/FREEZE Button
In OSD, press to move forward through the list or to increment the parameter value.
When not in OSD, press to freeze the display
7
HDBT
IN RJ-45 Connector
Connects to an HDBaseT transmitter
8
IR IN 3.5mm Mini Jack
Connects to an IR sensor
9
IR OUT 3.5mm Mini Jack
Connects to an IR emitter
10
RS-232 9-pin D-sub Connector
Connects to an acceptor to embed/de-embed control commands in the HDBaseT data
stream
11
HDMI OUT Connector
Connects to an HDMI acceptor
12
AUDIO OUT 3.5mm Mini Jack
Connects to an unbalanced stereo audio acceptor
13
ETHERNET RJ-45 Connector
Connect to a PC via a LAN
14
5V DC
+5V DC connector for powering the unit
All manuals and user guides at all-guides.com
all-guides.com
