6
VP-426 - Connecting the VP-426
4
Connecting the VP-426
Always switch off the power to each device before connecting it to your
VP-426
. After connecting your
VP-426
, connect its power and then
switch on the power to each device.
To connect the
VP-426
as illustrated in the example in
Figure 2
:
1. Connect a computer graphics video source to the PC IN 15-pin HD
connector and a PC audio source to the PC AUDIO IN 3.5mm mini jack
(both for example, from a PC).
When connecting to a component source (YPbPr), connect as shown
here:
PIN #
Signal
1
P
R
2
Y
3
P
B
6, 7, 8
Ground
2. Connect an HDMI video source to the HDMI IN connector (for example, from
a DVD player).
3. Connect the PC OUT 15-pin HD connector and the AUDIO OUT 3.5mm mini
jack to a computer graphics with audio acceptor (for example, an analog
display and an unbalanced amplifier).
When connecting to an XGA acceptor (RGBHV), connect to the
acceptor’s XGA connector
4. Connect the HDMI OUT connector to an HDMI acceptor (for example, an
LCD display with speakers).
5. If desired, connect the REMOTE terminal block connector to contact closure
switches (see
Section
4.1
).
6. Connect the 5V DC power adapter to the power socket and connect the
adapter to the mains electricity (not shown in
Figure 2
).
