![background image](http://html1.mh-extra.com/html/kramer/vp-311dvi/vp-311dvi_user-manual_2002208013.webp)
Connecting the VP-311DVI Automatic DVI / Audio Switcher
11
5.4 Controlling via the ETHERNET
You can connect the
VP-311DVI
via the Ethernet, using a crossover cable
(see section
5.4.1
) for direct connection to the PC or a straight-through cable
(see section
5.4.2
) for connection via a network hub or network router
1
5.4.1 Connecting the ETHERNET Port directly to a PC (Crossover Cable)
.
You can connect the Ethernet port of the
VP-311DVI
to the Ethernet port on
your PC, via a crossover cable with RJ-45 connectors.
This type of connection is recommended for identifying the
VP-311DVI
with the factory configured default IP address
After connecting the Ethernet port, configure your PC as follows:
1. Right-click the My Network Places icon on your desktop.
2. Select
Properties
.
3. Right-click Local Area Connection Properties.
4. Select
Properties
.
The Local Area Connection Properties window appears.
5. Select the Internet Protocol (TCP/IP) and click the
Properties
Button
(see
Figure 7
).
Figure 7: Local Area Connection Properties Window
1 After connecting the Ethernet port, you have to install and configure your Ethernet Port. For detailed instructions, see the
“Ethernet Configuration (FC-11) guide.pdf” file in the technical support section on our Web site:
http://www.kramerelectronics.com
im Vertrieb von CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203