![background image](http://html1.mh-extra.com/html/kramer/vp-31/vp-31_user-manual_2001235010.webp)
Getting to Know Your VP-61RS Switcher
The KRAMER
VP-61RS
is a full bandwidth, 6x1 VGA/XGA Switcher designed for computer and
workstation applications. The
VP-61RS
switches one of six VGA/Super-VGA/XGA graphics card outputs to
one monitor or vice versa, with no discernible signal degradation. The
VP-61RS
also has RS-232 control.
Input and output are directly coupled and conform to the highest standards. Signal bandwidth of over 180MHz
allows the
VP-61RS
to be used with the highest resolution graphics workstations.
Front/Rear panel features of the VP-61RS are described in Figure 3 and Table 3.
NOTE
For operation instructions refer to section
9.
Figure 3: VP-61RS Front/Rear Panel Features
Table 3: VP-61RS Front/Rear Panel Features
No. Feature
Function
1.
Illuminated power switch
Supplies power to the unit.
2.
INPUT SELECTOR
switches
(A-F)
Select the desired input to be switched to the output.
3.
INPUT A-F
HD 15F connectors
6 VGA/Super XGA inputs.
4.
OUTPUT
HD 15F Connector
VGA/Super-XGA output.
5.
RS-232
HD 15F Connector (DB-9 female
connector)
Used for control of the switcher from a PC through an
RS-232 interface.
6.
PROGRAM
Dip Switches
Allow proper configuration of the control signals received
and transmitted through the RS-232 control port,
master/slave configurations, and device ID numbers.
7.
Power connector
A 3-prong AC connector allows power to be supplied to
the unit. Directly underneath this connector, a fuse holder
houses the appropriate fuse.