![background image](http://html1.mh-extra.com/html/kramer/vp-27/vp-27_user-manual_2001231009.webp)
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your VP-27 Presentation Switcher
6
Table 2: Rear Panel VP-27 Presentation Switcher Features
#
Feature
Function
18
Y/C
IN
4-pin
Connect to the s-Video sources
2
19
CV
IN
RCA
Connect to the composite video sources
2
20
Y/C
OUT
4-pin
Connect to the s-Video acceptor
21
Video
Connectors
CV
OUT
RCA
Connect to the composite video acceptor
22
PC
IN
15-pin HD
Connectors
Connect to the VGA/UXGA video sources
2
23
PC
OUT
15-pin HD
Connector
Connect to the VGA/UXGA video acceptor
24 DIP-switches
DIP-switches for setup of the unit (DIP 1 and 4 are not used; DIP
2 PROG
1
, DIP 3 MIC DC; see section 6.2)
25
RS-232
(
Tx, Rx, G
) Terminal
Block Connector
Connects to the PC or the Remote Controller
26
PC AUDIO IN
3.5mm Mini Plugs Connect to the s-Video unbalanced audio sources
2
27
PC AUDIO OUT
3.5mm Mini
Plug
Connect to the PC unbalanced stereo audio acceptor (for the PC
video)
28
MIC
6.3mm Phone Jack Connector Connect to the microphone
29
CV AUDIO IN
RCA Connectors
Connect to the unbalanced audio sources
2
of the composite
video
30
CV AUDIO OUT
RCA
Connectors (L and R)
Connect to the composite video unbalanced audio acceptor (for
the composite video)
31
Y/C AUDIO IN
RCA Connectors
Connect to the s-Video unbalanced audio sources
2
32
Y/C AUDIO
RCA Connectors (L
and R)
Connects to the s-Video unbalanced audio acceptor (for the
s-Video)
33
MASTER OUT
RCA Connectors
(L and R)
Connect the master unbalanced audio channel acceptor
34 Power Connector with Fuse
AC connector enabling power supply to the unit
35
POWER
Switch
Illuminated switch for turning the unit ON or OFF
1 Always set to OFF (for factory use)
2 From 1 to 4