Your Presentation Matrix Switcher
7
Table 2: Front Panel VP-26 Presentation Matrix Switcher Features
#
Feature
Function
1 IR
(Infrared)
Receiver
Signals from the remote control transmitter illuminate the LED
2
POWER Switch
Illuminated switch for turning the unit ON and OFF
3
VGA/UXGA-AUDIO SELECTOR
Buttons
Selects the VGA/UXGA video-audio source to switch to
OUT 1 and/or OUT 2 (from 1 to 4)
4
VIDEO (CV)-AUDIO SELECTOR
Buttons
Selects the composite video-audio source to switch to OUT 1
and/or OUT 2 (from 1 to 4)
5
s-VIDEO (Y/C)-AUDIO SELECTOR
Buttons
Selects the s-Video-audio source to switch to OUT 1 and/or
OUT 2 (from 1 to 4)
6
COMP-AUDIO SELECTOR Buttons
Selects the component video-audio source to switch to OUT 1
and/or OUT 2 (input 1 and 2)
7
MASTER
AUDIO
SELECTOR
VGA/UXGA Button Press to route the selected audio signal (OUT 1 or OUT 2)
from the VGA/UXGA section to the master audio outputs
1
CV Button
Press to route the selected audio signal (OUT 1 or OUT 2)
from the composite video section to the master audio outputs
1
s-VIDEO Button
Press to route the selected audio signal (OUT 1 or OUT 2)
from the s-Video section to the master audio outputs
1
COMP. Button
Press to route the selected audio signal (OUT 1 or OUT 2)
from the component video section to the master audio outputs
1
MIC Button
Press to route the microphone input to the master audio
outputs
1
8
AUDIO LEVEL
MIC
+ Button Increase the microphone audio signal level
9
- Button
Decrease the microphone audio signal level
10
MASTER
- Button
Decrease the master audio signal level
11
+ Button Increase the master audio signal level
12 LOCK Button Press
to
lock
the front panel buttons
13 TALK OVER Button
Push the button to activate talk over
2
1 MASTER OUTPUT: LINE and SPEAKER
2 With the TALK OVER button pressed in, speaking into the microphone amplifies the voice of the speaker, overriding and
fading out all other audio channels. However, pressing the MIC button in the Master Audio Selector renders the Talk Over
function inactive
