Operating Your VP-1608 16x8 RGBHV/Balanced Audio Matrix
19
19
x
Every action requires user confirmation, to protect against
erroneous switching
x
Execution is delayed
8.3.1 Toggling between the AT ONCE and CONFIRM Modes
until the user confirms the action
To toggle between the AT ONCE and CONFIRM modes, do the following:
1. Press the TAKE button to toggle from the AT ONCE mode
CONFIRM mode
2. Press the illuminated TAKE button to toggle from the CONFIRM mode
back to the AT ONCE mode.
The TAKE button turns off and actions no longer require user confirmation.
.
The TAKE button illuminates and actions now require user confirmation.
8.3.2 Confirming a Switching Action
To confirm a switching action (in CONFIRM mode), do the following:
1. Press an
OUT-IN combination.
The corresponding input number that is displayed in the
INPUT STATUS
7-segment
display flashes. The TAKE button also flashes.
2. Press the flashing TAKE button to confirm the action.
The corresponding input number that is displayed in the
INPUT STATUS
7-segment
display no longer flashes. The TAKE button illuminates.
To confirm several actions (in CONFIRM mode), do the following:
1. Press each
OUT-IN combination in sequence.
The corresponding input numbers that are displayed in the
INPUT STATUS
7-segment
display blink. The TAKE button also flashes.
2. Press the flashing TAKE button to confirm all the actions.
The corresponding input numbers that are displayed in the
INPUT STATUS
7-segment
display no longer blink. The TAKE button illuminates.
8.4 Storing/Recalling Input/Output Configurations
You can store and recall up to 15 input/output configurations (or presets) in
non-volatile memory, using the INPUT SELECTOR buttons 1 to 15. The 15
input/output configurations also include the relevant audio-follow-
video/breakaway option definition, the video configurations, the audio
configurations, the audio gain level for each of the 16 inputs, and the audio
gain level for each of the eight outputs.
1 Failure to press the TAKE button within one minute (the Timeout) will abort the action
2 The TAKE button does not illuminate
3 The TAKE button illuminates
