![background image](http://html1.mh-extra.com/html/kramer/vp-1201/vp-1201_user-manual_2002194041.webp)
Firmware Upgrading
37
9. Click Run.
Upon completion of each stage of the operation, the check-box for that
stage turns green
1
.
When the operation is completed, all 4 check-boxes will be colored
green and the status bar message: Memory Verify Pass appears
2
:
VP1201.hex
A
Figure 37: Atmel – Flip Window (Operation Completed)
10. Close the “ Atmel – Flip” window.
11. Disconnect the power on the
VP-1201
.
12. If required, disconnect the RS-232 rear panel port on the
VP-1201
unit
from the Null-modem adapter.
13. Connect the power on the
VP-1201
.
1 See also the blue progress indicator on the status bar
2 If an error message: “ Not Finished” shows, click Run again