![background image](http://html1.mh-extra.com/html/kramer/vp-100a/vp-100a_user-manual_2000429004.webp)
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Overview
2
3 Overview
The
VP-100A
is a high performance XGA and audio interface that accepts a
computer graphics (XGA) signal on an HD15 connector and outputs it to
RGBHV
1
on BNC connectors, and also converts an unbalanced stereo audio
signal to balanced stereo audio.
In addition, the
VP-100A
includes:
A video bandwidth of 430MHz, to ensure transparent operation at
multiple resolutions including UXGA
A local monitor loop-through on an active HD15F connector
An unbalanced stereo audio input on a 3.5mm mini jack
A balanced stereo audio output on a terminal block connector
Hs and Vs shift control
Cable equalization control
Left and right audio level controls
ID Bit control switches
To achieve the best performance:
Connect only good quality connection cables, thus avoiding interference,
deterioration in signal quality due to poor matching, and elevated noise-
levels (often associated with low quality cables)
Avoid interference from neighboring electrical appliances and position
your Kramer
VP-100A
away from moisture, excessive sunlight and dust
4 Your VP-100A XGA / Audio Interface
Figure 1, Table 1 and Table 2 define the
VP-100A
front and rear panels:
1 Separate H and V (RGBHsVs) or RGBCs (separate composite sync)