Kramer Electronics Ltd.
VM
‑
4HDT
,
VM
‑
3HDT
,
VM
‑
2HDT
– Introduction
1
Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world
of unique, creative, and affordable solutions to the vast range of problems that confront the
video, audio, presentation, and broadcasting professional on a daily basis. In recent years, we
have redesigned and upgraded most of our line, making the best even better!
Getting Started
Although this user manual describes the
VM
‑
4HDT
it also refers to
VM
‑
3HDT
and
VM
‑
2HDT
, unless specified otherwise.
Note that:
•
VM
‑
4HDT
has 4 HDBaseT outputs.
•
VM
‑
3HDT
has one loop output and 3 HDBaseT outputs.
•
VM
‑
2HDT
has one loop output and 2 HDBaseT outputs.
We recommend that you:
•
Unpack the equipment carefully and save the original box and packaging materials for
possible future shipment.
•
Review the contents of this user manual.
Go to
www.kramerav.com/downloads/VM-4HDT
to check for up-to-date user manuals,
application programs, and to check if firmware upgrades are available (where appropriate).
Achieving the Best Performance
To achieve the best performance:
•
Use only good quality connection cables (we recommend Kramer high-performance,
high-resolution cables) to avoid interference, deterioration in signal quality due to poor
matching, and elevated noise levels (often associated with low quality cables).
•
Do not secure the cables in tight bundles or roll the slack into tight coils.
•
Avoid interference from neighboring electrical appliances that may adversely influence
signal quality.
•
Position your Kramer
VM
‑
4HDT
away from moisture, excessive sunlight and dust.
This equipment is to be used only inside a building. It may only be connected to other
equipment that is installed inside a building.
