KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting a VM-4HDCP 1:4 DVI Distributor
8
6
Connecting a VM-4HDCP 1:4 DVI Distributor
To connect the
VM-4HDCP
as illustrated in the example in
Figure 2
, do the
following:
1. Connect a DVI source (for example, a computer) to the INPUT connector.
2. Connect the 4 OUTPUT connectors
1
OUTPUT 1 connector to DVI acceptor 1 (for example, a
projector)
to up to 4 DVI acceptors, as
follows:
OUTPUT 2 connector to DVI acceptor 2 (for example, a
display)
OUTPUT 3 connector to DVI acceptor 3 (for example, a
display)
OUTPUT 4 connector to DVI acceptor 4 (for example, a
display)
3. Connect the power cord to the mains electricity (not shown in
Figure 2
).
To use the
VM-4HDCP
, do the following:
1. Turn ON the POWER.
2. Acquire the EDID (see section
6.1
).
1 Not all the outputs need to be connected
