Your VM-30AYC Audio/s-Video DA
3
Table 1: Features and Functions of the VM-30AYC 1:3 Audio/s-Video DA
#
Feature
Function
1
POWER
Switch
Illuminated switch supplying power to the unit
2
LEFT
Trimmer
Adjust
1
the left audio signal output level
3
AUDIO
LEVEL
RIGHT
Trimmer
Adjust
1
the right audio signal output level
4
Y
Trimmer
Adjust
1
the Y video signal output level
5
VIDEO
LEVEL
C
Trimmer
Adjust
1
the C video signal output level
6
s-VIDEO INPUT
4p Connector
Connect to the s-Video source
7
s-VIDEO OUT
4p Connectors
Connect to the s-Video acceptors (from OUT 1 to OUT 3)
8
R
RCA connector
Connect to the right audio source
9
AUDIO
INPUT
L
RCA Connector
Connect to the left audio source
10
R
RCA Connectors
Connect to the right audio acceptor (from OUT 1 to OUT 3)
11
AUDIO
OUT
L
RCA Connectors
Connect to the left audio acceptor (from OUT 1 to OUT 3)
12
12VDC
+12V DC connector for powering the unit
4.1 Connecting the VM-30AYC
To connect
2
the
VM-30AYC
1:3 Audio/s-Video DA
, as the example in Figure
2 illustrates, do the following:
1. Connect an s-Video source (for example, an s-Video player) to the s-VIDEO
INPUT 4p connector, and to the L (left) and R (right) AUDIO INPUT RCA
connectors.
2. Connect up to three s-VIDEO OUT 4p connectors
3
to up to three s-Video
acceptors (for example, s-Video recorders), and connect up to three L (left)
and R (right) AUDIO OUT RCA connectors to the appropriate audio inputs
on the s-Video acceptors.
3. Connect the 12V DC power adapter to the power socket and connect the
adapter to the mains electricity.
Adjust the audio level and the video level, if required.
1 Insert a screwdriver into the small hole and carefully rotate it, to trim the appropriate level
2 Switch OFF the power on each device before connecting it to your VM-30AYC. After connecting your VM-30AYC, switch
on its power and then switch on the power on each device
3 You do not have to connect all the outputs
