![background image](http://html1.mh-extra.com/html/kramer/vm-2dp/vm-2dp_user-manual_2001659009.webp)
6
VM-2DP - Connecting the VM-2DP 1:2 DisplayPort Distributor
5
Connecting the VM-2DP 1:2 DisplayPort
Distributor
Always switch OFF the power on each device before connecting it to
your
VM-2DP
. After connecting your
VM-2DP
, connect its power and
then switch on the power on each device.
To connect the
VM-2DP
, as the example in
Figure 2
shows, do the following:
1. Connect the DP source (for example, a PC with a DP output) to the INPUT
DP connector.
2. Connect the DP OUT connectors to up to two acceptors, as follows:
DP OUT 1 connector to a display
DP OUT 2 connector to a display
3. Connect the 5V DC power adapter to the power socket and connect the
adapter to the mains electricity.
Figure 2: Connecting a VM-2DP 1:2 DisplayPort Distributor
i
Display
Port
Computer
Graphics
Source
Display 1
Display 2
Display
Port
Display
Port