KRAMER: SIMPLE CREATIVE TECHNOLOGY
Using the VM-25 Video Distribution Amplifier
4
Table 1: Front Panel VM-25 Video Distribution Amplifier Features
#
Feature
Function
1
POWER
Switch
Illuminated switch supplying power to the unit
2
EQ.
Trimmer
Adjusts
1
the video EQ. (equalization) compensation of outputs 21 to 25
3
LEVEL
Trimmer
Adjusts
1
the video signal level of outputs 21 to 25
4
EQ.
Trimmer
Adjusts
1
the video EQ. (equalization) compensation of outputs 16 to 20
5
LEVEL
Trimmer
Adjusts
1
the video signal level of outputs 16 to 20
6
EQ.
Trimmer
Adjusts
1
the video EQ. (equalization) compensation of outputs 11 to 15
7
LEVEL
Trimmer
Adjusts
1
the video signal level of outputs 11 to 15
8
EQ.
Trimmer
Adjusts
1
the video EQ. (equalization) compensation of outputs 6 to 10
9
LEVEL
Trimmer
Adjusts
1
the video signal level of outputs 6 to 10
10
EQ.
Trimmer
Adjusts
1
the video EQ. (equalization) compensation of outputs 1 to 5
11
LEVEL
Trimmer
Adjusts
1
the video signal level of outputs 1 to 5
12
TERMINATION Button
Pushing in selects 75 , releasing selects Hi-Z
2
Table 2: Rear Panel VM-25 Video Distribution Amplifier Features
#
Feature
Function
13
INPUT
RCA Connector
Connects to the video source
14
LOOP
RCA Connector
For looping (if required)
15
OUT
RCA Connectors
Connect to the composite video acceptors (from 1 to 25)
16
12 V DC IN
+12V DC connector for powering the unit
4 Using the VM-25 Video Distribution Amplifier
You can connect:
A single
VM-25
unit (see section 4.1)
Several
VM-25
units to increase the number of outputs (see section 4.2)
4.1 Connecting a VM-25 Video Distribution Amplifier
To connect the
VM-25
as a 1:25 video DA
3
(see Figure 2), do the following
4
:
1. Connect a composite video source (for example, a composite video
player) to the INPUT RCA connector.
2. Connect up to 25 OUT RCA connectors
5
to the video acceptors (for
example, composite video displays).
1 Insert a screwdriver into the hole and carefully rotate it, to trim the level
2 For looping, select Hi-Z
3
DA is Distribution Amplifier
4 Switch OFF the power on each device before connecting it to your VM-25. After connecting your VM-25, switch on its
power and then switch on the power on each device
5 As required. Up to 25 outputs can be connected on the VM-25. Not all outputs need to be connected
