Connecting the VM-22HD 2 x 1:2 HD/SD-SDI DA
5
Table 1: VM-22HD 2 x 1:2 HD/SD-SDI DA Functions
#
Feature
Function
1
12V DC
Connector
+12V DC for powering the unit
2
OUTPUT A 2
BNC connector
Connects to the SDI A acceptor 2
3
OUTPUT A 1
BNC connector
Connects to the SDI A acceptor 1
4
OUTPUT B 2
BNC connector
Connects to the SDI B acceptor 2
5
OUTPUT B 1
BNC connector
Connects to the SDI B acceptor 1
6
INPUT A
BNC connector
Connects to the SDI A source
7
SD
1
/HD
2
INPUT A
LED
Illuminates blue for the HD-SDI signal, green for the SD-SDI
signal on input A
8
SD/HD INPUT B
LED
Illuminates blue for the HD-SDI signal, green for the SD-SDI
signal on input B
9
INPUT B
BNC connector
Connects to the SDI B source
10
ON
LED
Illuminates green when receiving power
5
Connecting the VM-22HD 2 x 1:2 HD/SD-SDI DA
To connect the
VM-22HD
, as the example in
Figure 2
illustrates, do the
following
3
:
1. Connect one or two HD-SDI/SD-SDI video sources (for example, cameras)
to the INPUT A and/or B BNC connectors.
2. Connect up to
4
four video OUTPUT BNC connectors to the appropriate
HD-SDI/SD-SDI video acceptors (for example, displays).
3. Connect the 12V DC power adapter to the power socket and connect the
adapter to the mains electricity (not shown in
Figure 2
).
The
VM-22HD
operates as soon as it is connected and powered on.
1 Standard Definition (SD) means an NTSC or PAL compatible video format, consisting of 480 (for NTSC) or 576 (for PAL)
lines of interlaced video; as well as 480 and 576 line progressive scan video format
2 High Definition (HD) means a video format, consisting of either 720 active lines of progressive video or 1080 lines of either
progressive or interlaced video
3 Switch OFF the power on each device before connecting it to your
VM-22HD
. After connecting your
VM-22HD
, switch on
its power and then switch on the power on each device
4 You do not have to connect all outputs
