Kramer VM-200HDCP, User Manual

Page: 8 / 16

VM-200HDCP - Defining the VM-200HDCP 1:2 DVI Distributor 5
5
4 Defining the VM-200HDCP 1:2 DVI
Distributor
Figure 1 and Figure 2 define the front and rear panels of the VM-200HDCP .
Figure 1: VM-200HDCP 1:2 DVI Distributor Front Panel
# Feature Function
1 INPUT DVI Connector Connect to a DVI source (see Section 5
2
)
MONITOR OUT DVI
Loop Connector
Connect to a DVI acceptor for input monitoring (see
Section 5
3
)
EDID
READ Button Press to acquire the EDID following selecting the EDID
source. Press again to indicate the EDID status (see
Section 6
Lights when configuring the EDID
)
4 SELECT Button Press to select the EDID source (single output, Auto-Mix or
default), see
Lights when configuring the EDID
Section 6
5
MONITOR
LED Lights green when an output is connected to the Monitor
Out connector and is active.
The LED flashes to indicate the source of the EDID
acquired (see Section 6
6
) or when connecting a non HDCP
display while providing HDCP content to the VM-200HDCP
OUT1 LED Lights green when an output is connected and is active.
The LED flashes to indicate the source of the EDID
acquired (see Section 6
7
) or when connecting a non HDCP
display while providing HDCP content to the VM-200HDCP
ON LED Lights green when the device receives power
Figure 2 defines the rear panel of the VM-200HDCP .
Figure 2: VM-200HDCP 1:2 DVI Distributor Rear Panel
# Feature Function
8 OUT 1 DVI Connector Connect to a DVI acceptor (see Section 5
9
)
5V DC Connector Connect to the power adapter, center pin positive