Step 4: Connect inputs and outputs
Always switch OFF the power on each device before connecting it to your
VM-1110xl
.
Always switch OFF the power on each device before connecting it to your
VM-1110xl
. For best results, we recommend that
you always use Kramer high-performance cables to connect AV equipment to the
VM-1110xl
.
Connect up to ten output devices as shown in example A and B and up to five as in example C. You do not have to connect all
inputs/outputs for the device to work correctly.
To achieve specified extension distances, use the recommended Kramer cables available at
www.kramerav.com/product/VM-1110xl
Using third-party cables may cause damage!
Step 5: Connect power
Connect the power cord to
VM-1110xl
and plug it into the mains electricity.
Safety Instructions (See
for updated safety information)
Caution:
•
For products with relay terminals and GPI\O ports, please refer to the permitted rating for an external connection, located next to the
terminal or in the User Manual.
•
There are no operator serviceable parts inside the unit.
Warning:
•
Use only the power cord that is supplied with the unit.
•
Disconnect the power and unplug the unit from the wall before installing.
•
Do not open the unit. High voltages can cause electrical shock! Servicing by qualified personnel only.
•
To ensure continuous risk protection, replace fuses only according to the rating specified on the product label which located on the
bottom of the unit.
Step 6: Operate VM-1110xl
•
To set a 1 to 10 configuration as in example A above, release the CONTROL
button out.
•
To set a 2x1:5 configuration as in examples B and C above, press the
CONTROL button in.
•
Using a small screwdriver, adjust the output signal level per channel using the
LEVEL trimmers A and B.
