Kramer VA-1H, User Manual, Page: 7 / 10

Operating the VA-1Hs
5
Figure 2: Connecting the VA-1Hs UXGA Sync Shifter
6 Operating the VA-1Hs
To operate your VA-1Hs :
1. Press the ON button.
2. While observing the display, press the right or left SHIFT buttons as needed
to center the picture. Depending on the resolution, the image can be shifted
up to about 1/3 of the screen in either direction.
Note : To increase the correction speed, press and hold the SHIFT button for
more than 3 seconds.
3. The setting is saved in non-volatile memory 5 seconds after the last
press/correction.
4. When the VA-1Hs is turned OFF and ON after a correction is made, the
ON button lights weakly to indicate a stored value.