background image

 

TP-780T/R - Connecting the TP-780T/R

 

 

 

Connecting the TP-780T/R 

 

Always switch off the power to each device before connecting it to your 
Transmitter and Receiver. After connecting your Transmitter and 
Receiver, connect their power and then switch on the power to each 

device. 

You can use the 

TP-780T/R

 

HDMI Line Transmitter

/

Re POE

 to configure an 

HDMI transmitter/receiver system, as shown in the example in 

Figure 3

.  

To connect the 

TP-780T

, connect the: 

1.  HDMI source (for example, a DVD player) to the HDMI IN connector. 

2.  RS-232 9-pin D-sub connector to a computer (for example, a laptop to 

control the projector). 

3.  IR 3.5mm mini jack to an IR emitter. 

4.  HDBT OUT RJ-45 connector over twisted pair to the  

HDBT IN 

connector. 

Alternatively, you can use any other certified HDBaseT receiver device (for example, 
the Kramer 

WP-580R

5.  48V DC power adapter to the power socket and connect the adapter to the 

mains electricity (not shown in

 

Figure 3

).  

To connect the 

TP-780R

, connect the: 

1.  HDMI OUT connector to the HDMI acceptor (for example, a projector). 

2.  RS-232 9-pin D-sub connector to an RS-232 port (for example, a projector that is 

controlled by the laptop connected to 

TP-780T

). 

3.  IR 3.5mm mini jack to an IR sensor. 

4.  HDBT IN RJ-45 connector over twisted pair to the 

TP-780T 

HDBT OUT 

connector. 

Alternatively, you can use any other certified HDBaseT transmitter device (for example, 
the Kramer 

WP-580T

5.  If the POE does not effectively power the 

TP-780R

, connect the 12V DC 

power adapter to the power socket and connect the adapter to the mains 

electricity (not shown in

 

Figure 3

).  

!

Summary of Contents for TP-780R























Reviews: