Kramer Electronics Ltd.
TP-752T / TP-752R – Mounting TP-752T/TP-752R
6
Mounting TP-752T/TP-752R
This section provides instructions for rack mounting
TP-752T/TP-752R
. Before installing in a
rack, verify that the environment is within the recommended range:
•
Operation temperature – 0
°
to 40
°
C (32 to 104
°
F).
•
Storage temperature – -40
°
to +70
°
C (-40 to +158
°
F).
•
Humidity – 10% to 90%, RHL non-condensing.
•
TP-752T/TP-752R
must be placed upright in the correct horizontal position.
Caution:
•
Always mount
TP-752T/TP-752R
in a rack before connecting any cables or power.
Warning:
•
Ensure that the environment (e.g., maximum ambient temperature & air flow) is
compatible for the device.
•
Avoid uneven mechanical loading.
•
Appropriate consideration of equipment nameplate ratings should be used for avoiding
overloading of the circuits.
•
Reliable earthing of rack-mounted equipment should be maintained.
To mount the TP-752T/TP-752R on a rack
Mount the unit in a rack using the recommended rack adapter
(see
www.kramerav.com/product/TP-752T
To mount the TP-752T/TP-752R on a table or shelf
•
Attach the rubber feet and place the unit on a flat surface.
•
Fasten a bracket (included) on each side of the unit and attach it to
a flat surface.
For more information go to
www.kramerav.com/downloads/TP-752T
