Kramer Electronics Ltd.
TP-600TRxr
– Introduction
2
Recycling Kramer Products
The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC aims to reduce
the amount of WEEE sent for disposal to landfill or incineration by requiring it to be collected
and recycled. To comply with the WEEE Directive, Kramer Electronics has made
arrangements with the European Advanced Recycling Network (EARN) and will cover any
costs of treatment, recycling and recovery of waste Kramer Electronics branded equipment on
arrival at the EARN facility. For details of Kramer’s recycling arrangements in your particular
country go to our recycling pages at
www.kramerav.com/il/quality/environment
Overview
Congratulations on purchasing your Kramer
TP-600TRxr
/
TP-600TR
4K60 HDMI/USB
Extender
.
TP-600TR
is identical to
TP-600TRxr
except for ETH extension.
TP-600TRxr
, in this User
Manual, refers to both devices, unless specified otherwise.
TP-600TRxr
is a high-performance, long-reach HDBaseT 3.0 extender for 4K60Hz (4:4:4)
HDMI, USB, Ethernet (
TP-600TRxr
only), RS-232, and IR signals over twisted pair, flexibly
set as transmitter-side or receiver-side device.
TP-600TRxr
transmitter-side converts all input
signals into the transmitted HDBaseT 3.0 signal.
TP-600TRxr
receiver-side receives the
HDBaseT 3.0 signal and converts it back into the original input signals.
TP-600TRxr
extends video signals up to 100m (330ft) over CAT copper cables at 4K@60Hz
(4:4:4) video resolution.
TP-600TR
extends video signals up to 40m (130ft) over CAT copper cables at 4K@60Hz
(4:4:4) video resolution and up to 70m (230ft) at 4K@30Hz (4:4:4).
TP-600TRxr
provides exceptional quality, advanced and user-friendly operation, and flexible
control.
Exceptional Quality
•
High Performance Standard Extender
– Professional HDBaseT extender for providing
extended-reach signals over twisted-pair copper infrastructures.
TP-600TRxr
is a
standard extender that can be connected to any market-available HDBaseT-compliant
extension product. For optimum extension reach and performance, use recommended
Kramer cables.
•
HDMI Signal Extension
– HDCP 2.3, EDID and CEC signals are passed through from
the source to the display. Supports HDR10, deep color, x.v.Color™, lip sync, HDMI
uncompressed audio channels, Dolby TrueHD, DTS-HD, 2K, 4K, and 3D as specified in
HDMI 2.0.
•
HDMI extension
– Uncompressed 4K@60Hz (4:4:4).
•
I-
EDIDPro™ Kramer Intelligent EDID Processing™ – Intelligent EDID handling,
processing, and pass-through algorithm that ensures Plug and Play operation for HDMI
source and display systems.