Connecting a UXGA / Component Distribution System
7
5 Connecting a UXGA / Component Distribution System
To
configure a
VPN-11
/
VPN-12
UXGA/Component distribution system as
the example in Figure 5 illustrates, do the following:
1. On the
VPN-11
, connect a component video source (for example, a DVD
player) to the Y/G, B-Y/B and R-Y/R RCA (component video) INPUT
connectors
1
.
2. On the
VPN-12
, connect the Y/G, B-Y/B and R-Y/R RCA (component video)
OUTPUT connectors to a component acceptor
1
(for example, a plasma display).
3. Connect the LINE OUT 12-pole detachable terminal block connector of the
VPN-11
to the LINE INPUT 12-pole detachable terminal block connector
VPN-12
, via coaxial cabling
2
(maximum range of up to 10m).
4. On the
VPN-11
unit connect a 12V DC power adapter to the power socket
and connect the adapter to the mains electricity. The
VPN-12
unit receives its
power via the coaxial cable.
VPN-11
VPN-12
Plasma
Display
DVD Player
Figure 5: UXGA/Component Distribution System (up to 10m) Coaxial Cable
1 Alternatively, you can connect a computer graphics source to the VPN-11 UXGA INPUT, and connect the UXGA
OUTPUT connector on the VPN-12 to an acceptor (for example, a display)
2 The Kramer BC-3X2T7S cable is recommended. See our Web site at http://www.kramerelectronics.com
