Overview
3
3
Overview
Your
VP-222K
UXGA Switcher / DA
is a combined 2x1 switcher and 1:2
distribution amplifier for computer graphics signals.
The
VP-222K
UXGA
Switcher / DA
has two inputs and a switch to select between the two
sources.
More specifically, the
VP-222K
UXGA Switcher / DA
features:
A video bandwidth of 415MHz that ensures transparent operation
at the highest resolution UXGA modes
Buffered and isolated inputs that are distributed to two identical
outputs, allowing different acceptors to be connected (monitors,
projectors)
KR-ISP™ advanced sync processing that ensures compatibility
with a wide range of computers (even if the sync level is low) by
restoring the sync signal waveform
To achieve the best performance:
Use only good quality connection cables
1
to avoid interference,
deterioration in signal quality due to poor matching, and elevated
noise levels (often associated with low quality cables).
Avoid interference from neighboring electrical appliances that
may adversely influence signal quality and position your Kramer
VP-222K
away from moisture, excessive sunlight and dust
Caution
– No operator-serviceable parts inside unit.
Warning
– Use only the Kramer Electronics input power
wall adapter that is provided with this unit
2
.
Warning
– Disconnect power and unplug unit from wall
before installing or removing device or servicing unit.
1 Available from Kramer Electronics on our Web site at http://www.kramerelectronics.com
2 For example, part number 2535-052002
