Tavor 6-O - Defining the Tavor 6-O
7
7
#
Feature
Function
1
ON/AUTO Switch
Set to AUTO for the speakers to enter the
standby mode when idle for over 10 minutes.
Once a signal is detected the speakers power
up again.
Set to ON to keep the speaker powered
continuously
2
SPEAKER OUT Connectors
Connect the active speaker to the (+) and (-)
stereo sockets on the passive speaker
The L speaker is active and the R speaker is
passive
3
PWR/STBY
LED
Illuminates in green when powered (ON/AUTO
switch set to ON or AUTO
– see item 1)
illuminates in red when in the standby mode
(ON/AUTO switch is set to AUTO
– see item 1)
In the AUTO mode (ON/AUTO switch is set to
AUTO
– see item 1), the LED illuminates
green if an input signal is detected and
illuminates red if idle for over 10 minutes
4
INPUT
Connectors
5-pin Terminal Block
Connect the audio source to one or more of the
input connectors
5
L and R RCA
6
3.5mm Mini Jack
7
BASS
Control Knob
Rotate the button to control the bass
8
TREBLE
Control Knob
Rotate the button to control the treble
9
VOLUME
Control knob
Rotate the button to adjust the audio volume
10
AC-Input Power Supply (self-
adjusting)
Connect to the AC power cord
11
POWER Switch
For turning the unit ON (
–) or OFF (O)
12
LOOP OUTPUT
3.5mm Mini Jack
Connector
Connect to another pair of active speakers
13
SUB OUT
3.5mm Mini Connector
If required, connect an active sub-woofer to this
output for maximum bass reproduction
