The Kramer T-RC-8IR TBUS Mounting Insert Kit for RC-8IR
Congratulations on purchasing your Kramer insert kit for the
RC-8IR
. The
T-RC-8IR
lets you
add the
RC-8IR
to TBUS inner frames that include dual power socket openings. (The
TBUS-1Axl
,
TBUS-10xl
and
TBUS-18xl
).
Figure 1: T-RC-8IR Insert Kit for RC-8IR (P/N: 80-000599)
Note that you can only use the EUROPEAN VERSION of the
RC-8IR
with the
T-RC-8IR
when installing in a TBUS. Other
versions will not fit the
T-RC-8IR
.
Installing the T-RC-8IR Insert Kit for RC-8IR
To install the
T-RC-8IR
insert:
1. Unscrew the two faceplate
attachment screws and remove the
RC-8IR
faceplate.
Figure 2: RC-8IR Faceplate Holes Insert Kit for RC-8IR
2. Place the
T-RC-8IR
over the
RC-8IR
enclosure so that both faceplate holes are aligned
with the faceplate holes on the
RC-8IR
enclosure and the IR IN receiver fits into the IR
IN opening (see
).
3. Insert the faceplate screws through the
T-RC-8IR
and
RC-8IR
enclosure faceplate
holes, and tighten.
Figure 3: T-RC-8IR Installation
!
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
