![background image](http://html.mh-extra.com/html/kramer/swm-1/swm-1_user-manual_2002123008.webp)
6
SWM-1 - Installing the SWM-1
5
Installing the SWM-1
This section describes how to install the
SWM-1
.
The following instructions refer to the installation of one unit.
5.1
Preparing for Installation
Before installing the loudspeakers, check that you have all the required tools:
•
Crosshead/Flathead screwdriver
•
Power drill
•
6mm (1/4") masonry bit or 3mm (1/8") wood bit
•
Pencil
•
Level and stud finder (optional)
5.2
Attach the Ball Interface to the Loudspeaker Rear Panel
This section describes several methods in which you can attach the
SWM-1
Ball
Interface to the rear side of the loudspeaker. Choose the method that fits best to
your loudspeaker:
One Insert:
Connect the ball interface to the
single hole on the loudspeaker rear
panel using screw types A, B or C
(see
Section 4.2
i