SPK-CCF848 - Installing the Flat Ceiling Speaker
11
3. If required, daisy-chain the next speaker (see
Section 4.3
)
Note: Do not over-tighten the screws. It may cause damage to both the speakers
and the surface.
4.6
Installing the Half-Tile Speaker
When installing the half-tile model:
1. Remove the ceiling tile.
2. Cut the ceiling tile in half (to 30x60cm).
3. Place the ceiling mounting bracket (supplied with the half tile unit only)
between the ceiling rails, as illustrated in
Figure 9
.
Figure 9: Placing the Ceiling Mounting Bracket
4. Drop the half tile speaker in the appropriate opening, so it is supported by
the ceiling rails and the ceiling mounting bracket (see
Figure 10
).
No screws are needed.
