![background image](http://html.mh-extra.com/html/kramer/spk-cc678/spk-cc678_user-manual_2002103007.webp)
Your Closed-back Ceiling Speakers
5
5
Table 2
defines the Closed-back Ceiling
speaker hardware items (per speaker
pair):
Table 2: Closed-back Ceiling
Speakers Hardware Items
Description
A pair of
ceiling
speakers
(one shown
1
)
Two grilles
(one shown)
Cutout
template
Table 3
defines the ceiling mounting kit items:
Table 3: Ceiling Mounting Kit Items
Four
support
ring screws
Two
ceiling
support
rings
(C-ring) –
one shown
Two pairs of
tile rails – one
of a pair
shown
Each Closed-back ceiling
speaker is supported by a C-ring and two tile rails
2
.
When mounting onto the ceiling tiles
3
, use both supports. When mounting onto
a sheetrock ceiling, the C-ring alone is used to reinforce the ceiling material.
Figure 4
shows a schematic diagram of the closed-back ceiling speaker:
1 The quantity applies to all models
2 The tile rails prevent the speakers from falling if the tile itself comes out or falls apart, as their ends catch onto the T-grid
3 Be sure that the tiles can support the speaker. Smaller sized tiles or fiberglass-type tiles cannot support the weight of the
speakers. When this is the case, the speakers will need additional support