Operating the SP-11HD HD-SDI Processor
13
13
•
To set “NORM” of the current level rapidly, press and hold
down the + button and – button together, continuously, the
7-segment display shows “0”
•
To undo the adjustment, press the appropriate button one
more time. The appropriate button no longer blinks
•
To save result of adjustment, press the STORE button twice
•
To store result of adjustment in other setup #, press the
STORE button once and then select a setup # between 1 and
16 by pressing the + and – button. Then press STORE button
one more time
•
If the result of the adjustment equals “NORM”, then the
appropriate button no longer illuminates, otherwise this
button continues to illuminate in main mode
7.1
Storing/Recalling Setups
You can store and recall up to 16 setups (or adjustments) in non-volatile
memory, using the STORE and RECALL buttons together with the + and –
buttons.
To store
1
•
Press the STORE button and then select a setup # between 1 and
16 by pressing the + and – buttons (the current settings are saved
to that setup #)
a setup, do the following:
•
Then press STORE button one more time
To recall a setup, do the following:
•
Press the RECALL button and then select the appropriate # (that
corresponds to the setup #) by pressing the + and – buttons (the
selected setup is recalled)
•
Then press RECALL button one more time
1 Storing a new setup over a previous setup # replaces the previous setup #
