
6
SID-X1 - Defining the SID-X1 Step-in Commander
Figure 2
defines the rear panel of the
SID-X1.
Figure 2: SID-X1 Step-in Commander Rear Panel
#
Feature
Function
1
TP OUT
RJ-45 Connector Connect to a compatible switcher, for example, VP-81SID using
CAT 6 or higher specification cable
2
REMOTE STEP-IN
3-way
Terminal Block
Connect to the remote, contact closure step-in switch and LED
(see
Section 5.1
)
3
REMOTE SELECT
3-way
Terminal Block
Connect to the remote, contact closure input selection switch and
LED (see
Section 5.2
)
4
HDMI, DP, DVI, UXGA,
GND, LED ANODES
5-way Terminal Block
Connect to the remote input indicator LEDs (see
Section 5.3
).
Note
: All LED supplies include a current limiting resistor and are
designed to work with any standard LED
5
OPTION
DIP-switches
DIP-switch 1, 2—audio mode selection (See
Section
5.4
)
DIP-switch 3—no function
DIP-switch 4—EDID lock (See
Section
5.4
)
6
12V DC
Power Connector
Connect to supplied power adapter, center pin positive
Summary of Contents for SID-X1
Page 1: ...KRAMER ELECTRONICS LTD USER MANUAL MODELS SID X1 Step in Commander P N 2900 300754 Rev 5...
Page 2: ......
Page 22: ......