Step 3: Install RTBUS-28xl
To mount the unit, follow these steps:
1. Cut a round hole in the table, in the desired location, with a diameter ranging from 140mm to 142mm (5.5
” to 5.6”).
2. Insert the cables through the pass-through openings:
A
B
C
3. Mount
RTBUS-28xl
into the table.
4. Connect the cables:
Connect devices to the pass-through cables
and power socket.
Safety Instructions
Caution:
There are no operator serviceable parts
inside the unit.
Warning:
Do not open the unit. High voltages can
cause electrical shock! Servicing by
qualified personnel only.
Warning:
Disconnect the power and unplug the unit
from the wall before installing.
for updated safety information.