6
RK-PS1 - Mounting the RK-PS1
Remove the adjusting plate.
Adjust the height of the
RK-PS1
by partially
releasing and then tightening
the two nuts on the sides so
that the power supply fits
well. Then set the adjusting
plate to ensure that the
power supply is fixed in
place.
Check the location in which you want to attach the
RK-PS1
and squeeze-in the two
M5 caged nuts from behind the location set for the
RK-PS1
, into the shelf square
openings:
Figure 2: Attaching the M5 Caged Nuts
– Rear view
After fitting the nuts you can install the
RK-PS1
.
