6
RC-54DL - Connecting the RC-54DL KNET™ Auxiliary Control Panel
4
Connecting the RC-54DL KNET™ Auxiliary
Control Panel
Always switch off the power to each device before connecting it to your
Transmitter and Receiver pair. After connecting your Transmitter and Receiver
pair, connect their power and then switch on the power to each device.
To connect the
RC-54DL
, as shown in the example in
Figure 3
, do the following:
1. Connect the K-NET ports to any
RC
devices with K-NET (for example, the
RC-63DL
and
SL-12
).
2. Connect the 12V DC power adapter to the
RC-54DL
power socket and to the
mains electricity (not shown in
Figure 3
).
Alternatively, the
RC-54DL
can receive power over the K-NET port via the
connected master room controller.
Figure 3: Connecting the RC-54DL
!
im Vertrieb von CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
