8
RC-43SL - Connecting the RC-43SL
4.2
Connecting the Ethernet Port
The Ethernet connection of the
RC-43SL
allows you to perform all control functions
of the
RC-43SL
over the Internet using a PC running the Kramer
Site-CTRL
control
program.
To connect the
RC-43SL
to a network:
1. Connect the Ethernet port of the
RC-43SL
to the Ethernet port on a network
hub or network router, via a straight cable with RJ-45 connectors.
2. Over the network, connect to a PC running
Site-CTRL
.
After connecting the Ethernet port, you have to install and configure it. For detailed
instructions on how to install and configure your Ethernet port, see the K-Config
Configuration Guide
available for download at the Kramer Web site:
www.kramerelectronics.com
.
4.3
Connecting the K-NET Port
The K-NET port is wired as shown in
Figure 4: K-NET Pinout Connection
Summary of Contents for RC-43SL
Page 1: ...USER MANUAL MODEL RC 43SL 6 Button Room Controller P N 2900 300450 Rev 1 www kramerAV com...
Page 2: ......
Page 3: ......
Page 17: ......
