8
PT-110xl, WP-110, PT-120xl, TP-120 - WP-110 XGA Line Transmitter
Figure 3: WP-110 XGA Line Transmitter
#
Feature
Function
1
ON
LED
Illuminates when receiving power
2
XGA IN
15-pin HD (F)
Connector
Connect to the XGA source
3
POWER
SUPPLY
GND PIN
Connect (-) to the Ground
+12V DC PIN
Connect (+) to the connector for powering the unit
4
LINE OUT
RJ-45
Connector
Connects to the
LINE IN
RJ-45
connector on the
PT-120xl
or
TP-120
XGA Line Receiver
Use a UTP cable with CAT 5 connectors at both ends (the
PINOUT is defined in
Figure 8
)
5
HS
Switch
Slide the switch to the left (by default, both switches are set
to the right) to change the HS (horizontal sync) polarity to
(NEG.) negative polarity (down-going syncs); slide the
switch to the right (NORM.) to retain the polarity
6
VS
Switch
Slide the switch to the left to change the VS (vertical sync)
polarity to (NEG.) negative polarity; slide the switch to the
right (NORM.) to retain the polarity