6
PSE-4 - Connecting the PSE-4
5
Connecting the PSE-4
Always turn off the power to each device before connecting it to your
PSE-4
. After connecting your
PSE-4
, connect its power and then turn
on the power to each device.
Figure 3: Connecting the PSE-4
10G Quad POE Injector
To connect the PSE-4 as illustrated in the example in
Figure 3
:
1. Connect the first HDBT transmitter, (for example, the
WP-5VH2
) to the
LAN + POE 1 RJ-45 connector on the rear panel of the
PSE-4
.
2. Connect the LAN 1 RJ-45 connector on the rear panel of the
PSE-4
to the
HDBT receiver, (for example, the
VS-1616D
).
3. Repeat steps 1 and 2 for an additional three devices.
i
Summary of Contents for PSE-4
Page 1: ...KRAMER ELECTRONICS LTD USER MANUAL MODEL PSE 4 10G Quad POE Injector P N 2900 300487 Rev 1...
Page 2: ......
Page 13: ......
