![background image](http://html1.mh-extra.com/html/kramer/pse-1/pse-1_user-manual_2001042009.webp)
6
PSE-1 - Connecting the PSE-1
5
Connecting the PSE-1
Always turn off the power to each device before connecting it to your
PSE-1
. After connecting your
PSE-1
, connect its power and then turn
on the power to each device.
Figure 3: Connecting the PSE-1
10G POE Injector
To connect the PSE-1 as illustrated in the example in
Figure 3
:
1. Connect the HDBT transmitter, (for example, the
WP-5VH2
) to the LAN +
POE RJ-45 connector on the rear panel of the
PSE-1
.
2. Connect the LAN RJ-45 connector on the rear panel of the
PSE-1
to the
HDBT receiver, (for example, the
TP-588D
).
3. Connect the power adapter of the
TP-588D
to the
TP-588D
and to the mains
supply, (not shown in illustration).
i
Summary of Contents for PSE-1
Page 1: ...KRAMER ELECTRONICS LTD USER MANUAL MODEL PSE 1 10G POE Injector P N 2900 300438 Rev 1...
Page 2: ......
Page 13: ......