Kramer PIP-4, User Manual, Page: 32 / 34

Communication Protocol 3000
29
Network settings commands
DHCP_MODE =
0
– Don't use DHCP (Use IP set by factory or IP set command).
1
– Try to use DHCP, if unavailable use IP as above.
Change protocol
ethernet port
# ETH-PORT PROTOCOL , PORT CR
# ETHP CR
~ETH-PORT PROTOCOL ,PORT RESULT
CRLF
Read protocol ethernet
port
# ETH-PORT? PROTOCOL CR
# ETHP? CR
~ETH-PORT PROTOCOL , PORT CRLF
PROTOCOL = TCP / UDP (transport layer protocol)
PORT
=
ethernet port to enter protocol 3000 commands.
1-65535 = User defined port
0 - reset port to factory default (50000 for UDP, 5000 for TCP)