Kramer MV-6, User Manual

Page: 29 / 75

MV-6 - Operating the MV-6 Remotely 25
7.3 The Menu Bar
The menu bar options are shown in the following table.
Menu
Bar
Options Sub Menu Description
FILE Open Open an existing configuration
Save Save the current configuration
Exit Exit the MV-6 Controller software
DEVICE Connect/
Disconnect Connect or disconnect to the device (see
Section
‎7.3.2
)
Take/Update
Press Take to put the device in off-line mode. Press
Update to implement waiting changes and return
the device to on-line mode (see
Section
‎7.3.7
)
Firmware Update Update the device firmware (see Section
‎7.3.12
)
Device Details
Retrieve and display the device details, such as,
model, unit name, version, and so on. (see
Section
‎7.3.11
)
DISPLAY
Presets
Set the screen to display one of the preconfigured
configurations:
6-Split, Quad, Full, 2-Split
Output Resolution
Set the output resolution:
720P 59.94Hz, 720P 50Hz, 1080P 60Hz, 720P
60Hz, 1080P 59.94Hz, 1080P 50Hz
Genlock Control
Unlocks the genlock or sets the source for genlock
control:
Free Run (default), Input 1, Input 2, Input 3, Input 4,
Input 5, Input 6
Background Color Sets the background color of the window
Window Border Turns the window border on and off
Refresh Retrieves full information from the device
ABOUT Displays the Step-in Software and Kramer company details
Note: Any actions that you are not authorized to perform are grayed out.